Plexineon Recessed Mount System Sample Kit
Plexineon® Recessed Mount System
For projects where you would like Plexineon embedded in a wall or ceiling, use the Recessed Mount System to save design time and cut the time and cost it takes for contractors to prepare the channel and install the Plexineon, all while improving the consistency of the installation.
The Recessed Mount System also provides you with more flexibility in design – the specially designed clips allow three fixture positions: exposed, semi-recessed, and fully recessed (flush).
The Plexineon Recessed Mount System can be used for drywall, stone, marble, and concrete installations. The Recessed Mount channel is composed of an aluminum extrusion with a black anodized finish. The extrusion is not only field cuttable, but multiple extrusions can also be used to create continuous runs with interlocking alignment pins. In addition, a paint mask is provided to protect the housing interior during construction and wall finishing, and the flush plaster trim makes for a seamless appearance in drywall and allows for clean fixture installation.
|1′ White 2X 3500K|
|Power supply for samples (0.5A)|
|1’ sections of Flush Plaster Trim x2|
|1’ section of Paint Mask|
|End Plate Screws x4|
|Alignment Pins x4|
|Nylon Clips x2|
|Cloth Bag (16 1/4″ x 9″)|
Radisson Blu Aqua Hotel Chicago by CharterSills & Associates.